U.S. Panel Urges ‘Energy Star’ Nutrition Ratings for Food Labels

 U.S. Panel Urges Energy Star Nutrition Ratings for Food Labels

Taking a cue from the Energy Star ratings on the front of household appliances, a panel of experts is recommending that a similarly easy-to-read system appear on every packaged food item in American grocery stores so busy consumers can glean nutritional info at a glance.

The recommendation comes from the Institute of Medicine (IOM), which was commissioned by Congress to study the issue over the past two years. the panel found that the dizzying variety of front-of-pack labels currently out there — grocery stores, food manufacturers and even health organizations like the American Heart Association put their own stamps on various foods — was leading to more consumer confusion than healthy choices.

Part of the problem is that food manufacturers like to tout their products’ pluses (high in vitamin A) on the front of the box, without acknowledging their minuses (high in fat).

The IOM reviewed front-of-package labeling systems in the U.S. and abroad (here‘s a good rundown of labels) and found that, in terms of clarity for the consumer, no system was better than the next. so the panel proposed a standard label for all products that would show how many calories per serving the food item contains, along with a three-point system (checkmarks or stars) that would indicate whether the product contains acceptable levels of sodium, added sugars and trans fats or saturated fats.

Items would get a point each for having low enough levels of each of the three nutrients “of concern” — which the panel chose for being most closely associated with health problems like obesity, diabetes and heart disease — for a maximum of three points. if a product has a superhigh amount of any of the nutrients, rendering it unhealthy overall, it would receive no points. so sugary soda, for example, would get zero points for having high added sugar, even though it is low in fats and sodium.

Whole wheat bread would get three points, while graham crackers would get two (low levels of fats and sodium, but high in added sugar), and soup crackers would get zero. the hope is that the point system will not only help consumers cut through the culinary clutter and make fast, smart decisions, but also inspire grocers to encourage the sales of high-point foods and encourage manufacturers to reformulate their foods in pursuit of points.

During a meeting with media on Thursday, Ellen Wartella, the chair of the IOM panel and a professor of psychology at Northwestern University, explained that the system was meant to be interpretive more than informational. so, even shoppers with no nutritional knowledge and those who are too rushed to analyze the Nutrition Facts panel on the side of the box can still identify healthy products in a split-second effort. It’s the difference between “This has 100 grams of saturated fat” and “Eating this is not going to do you any favors.”

The panel explained that a front-of-pack label that focuses on best-to-avoid nutrients, rather than those that should be encouraged like, say, fiber and potassium, is a reflection of public need. Americans are eating too much fat, sugar and sodium, and at a time when two-thirds of the population is overweight or obese and many are battling diet-related health problems like heart disease and Type 2 diabetes, the government’s most important role should be in guiding people away from unhealthy foods, the panel advised. (Certainly a far cry from the World War II days, when the government recommended that the underfed population consider butter its own food group.)

The IOM’s point system leads to some awkward ratings, however. A Diet Coke, for example, would get three points for having low levels of fats, added sugars and sodium. meanwhile, 1% milk would get only two points, due to its fat content. But with that fat, of course, come good nutrients that an empty diet soda doesn’t provide.

The process is still in its early stages. It’s unclear whether federal regulators will adopt the new labels or whether they will be mandatory — though the project would make more sense if they were. Part of the justification for recommending a single, uniform system is that all products will be easily comparable. and allowing it to be voluntary would potentially remove many points of comparison.

For its part, the Grocery Manufacturers of America, an industry group that represents food makers, said it would go ahead with its own voluntary system of package-front labeling called Facts Up front. That system lists calories, fat, sodium and sugar, as well as beneficial nutrients like fiber. It gives information, but doesn’t rate products. “We believe the most effective programs are those that trust consumers and not ones that tell consumers what they should and should not eat,” Scott Faber, a lobbyist for the Grocery Manufacturers Association, told the AP.

The next step is for the Food and Drug Administration (FDA) to decide whether or how to implement the panel’s recommendation. the FDA is keen to overhaul front-of-package labeling, but the agency is continuing to study the matter.

Good promotion, the IOM panel noted, would also be key to any program’s success. and the proposed three-point system would be an easy sell to consumers. all they need to understand is that “three is better than two, and two is better than one,” said Matt Kreuter, a professor of social work and medicine at Washington University and a member of the panel. “And the more points it has, the healthier it is.”

Katy Steinmetz is a reporter at TIME. find her on Twitter at @KatySteinmetz. You can also continue the discussion on TIME’s Facebook page and on Twitter at @TIME.

reNews Europe: Marine Renewables

 reNews Europe: Marine Renewables  English wave power company Trident Energy is strengthening its management team to support the development of its PowerPod system.

The team will be based in the company’s new central Glasgow office.

The company has appointed Jonathan Armstrong to its board of directors in the new role of chief operating officer responsible for overseeing the company’s day-to-day running. 

Trident said Jonathan has an extensive experience managing high growth companies operations and delivering low carbon technology programmes in the energy sector. He previously held operational responsibility for a £10m p.a. turnover consultancy division.

The company also hired Susie Allison who will now be responsible for business development. Susie previously worked as a Technology Analyst within the Foresighting Team of ITI Scotland (latterly Scottish Enterprise) providing technical and market support for technology programmes throughout their development. 

The team was completed with the addition of systems engineer Alan Mackay.  Alan previously worked at Frazer-Nash where he provided project management and technical input across a variety of industries focused on renewable energy and nuclear.

Trident Energy CEO Steve Packard said: “I am delighted that Trident Energy has secured some of the foremost talent in the sector to support the development of our innovative technology to make offshore renewable energy commercial.”

Photo: Trident Energy’s PowerPod under testing

Wind Energy – Dutch Windmills

 Wind Energy – Dutch Windmills

When people hear the word windmills, the next thing that comes to their mind is often Holland or Netherlands. this is not a surprise at all as this place is very well known for their windmills. Windmills are what characterizes Holland the most for most people who have never been to this place and have only read about the place in books, magazines, or the internet.

Windmills are very significant to this amusing country as Netherlands is below sea level. yes Netherlands is a low country and they need the mechanisms of the windmill in order to keep their water out. The country is near the North Sea and has a lot of rivers itself. Netherlands has really been dealing with a lot of water and flooding problems for centuries. They have built different dikes, fortifications, and of course the windmills in order to create new land. The oldest windmill in Netherlands is a watermill that goes all the way back to the eight century. These mechanisms and techniques were used to pump dry hundreds of lakes and swamps and to prevent their lands from flooding.

There are a thousand windmills in the whole of Netherlands and it is definite that you are bound to encounter one when you visit this idyllic country. here are some of the most famous and spectacular windmills that Netherlands has to offer the world.

Kinderdijk is the most popular of polder mills and is listed as one of UNESCO’s World Heritage Sites. there are a total of nineteen windmills in this group, which makes for a very breath taking view of the whole place. Seeing the Kinderdijk will give you a great impression of how these windmills were able to prevent floods from taking place.

Then there are the mills of Schiedam, which are the five largest windmills of the world. some of these windmills are even forty meters high. some of these windmills play an important role in the production of jenever, which is Dutch gin. Instead of keeping water off or reclaiming lands, these windmills were used to grind grain.

Then lastly, go and visit Zaanse Schans. Over 250 years ago, about 600 windmills in Holland formed the first industrial site in the world. These windmills performed a range of industrial duties such as manufacturing shelves, paint, mustard, oil and paper. Nowadays, it is an open-air conservation area and museum for tourists.

Windmills have always been characteristic of the Dutch landscape and have been a huge part in the country’s terrible struggle with water. Windmills have been symbolic of the Dutch country with its majestic bodies and astounding fans put against a backdrop of the country style and rural places of Holland. A visit to the Netherlands in order to see the windmills feels as if you are inside a pretty picture in a postcard. Do not pass up the chance of seeing these splendid windmills for yourself.

BLM approves Salt Wells Geothermal Energy Projects

1318093274 37 BLM approves Salt Wells Geothermal Energy ProjectsBLM NEWS RELEASE

CARSON CITY — the Bureau of Land Management (BLM) Carson City District-Stillwater Field Office has approved the Salt Wells Geothermal Energy Projects proposed by Ormat Nevada, Gradient Resources, and NV Energy by issuing three Records of decision on the environmental impact statement (EIS) for the projects, which are all located in Churchill County, Nev.  the Salt Wells Geothermal Energy Projects include an NV Energy transmission line that would extend from Fallon south to the Salt Wells area just east of Carson Lake, one geothermal power plant proposed by Ormat Nevada, Inc., and up to six geothermal power plants proposed by Gradient Resources.  the projects are estimated to create about 370 temporary jobs during construction and about 70 permanent jobs.

The BLM issued the final EIS on July 22 which identified the preferred alternative for each of the three projects.  because of the similar timing, geographic area, and type of action, the BLM analyzed the proposals in one EIS.

The Salt Wells Geothermal Energy Projects EIS was one of the BLM’s priority renewable energy projects, because the projects were “smart from the start,” meaning the projects were designed to be environmentally responsible and were coordinated with county, state and federal agencies. the projects must comply with the conditions of permit for the Nevada Division of Minerals Geothermal Resource Development Permit Application and with applicable rules and regulation of other local, state, and federal agencies.

The Records of decision and the EIS are posted on-line at: http://www.blm.gov/nv/st/en/fo/carson_city_field/blm_information/nepa/salt_wells_energy.html

Over the past four years, 235 parcels have been sold competitively in Nevada for more than $40 million, nearly half of that amount has come from high bids for geothermal leases sold in Churchill County.  the BLM Stillwater Field Office has approved 10 geothermal exploration projects and seven geothermal power plants this year.  Since 2009, the BLM Stillwater Field Office has permitted more than 475 geothermal notices of intent, geothermal drilling permits, sundry notices and geothermal inspections.

Further inquiries should be directed to Colleen Sievers, Project Manager, 775-885-6000 or e-mail: [email protected]

CORRECTING and REPLACING Molycorp CEO to Congress: China

Reissuing release dated September 21, 2011 to add ticker symbol for searching purposes.

the release reads:

MOLYCORP CEO TO CONGRESS: CHINA

java – a question about layout managers – Stack Overflow

 java   a question about layout managers   Stack Overflow

Unfortunately, whether a layout manager honors minimum size, max size, etc is up to the layout manager implementation. this leads to a lot of confusing behavior because not all layout managers honor them, and BorderLayout doesn’t honor those constraints.

BoxLayout will honor those values. JComponent.setBounds is what the LayoutManager will use to set the bounds of a child so your layout manager will probably overwrite whatever you put in there. if you are trying to limit how small something can get I’d suggest setting a minimum size on your JFrame or JDialog then that prevent someone from making it too small causing the layout manager to do funny things.

My first suggestion for anyone doing Swing is grab TableLayout, spend 15 minutes to learn it, and most of your layout problems can be solved. I don’t know if that applies to what you’re doing, but it won’t be long before you have a layout problem that requires it. TableLayout allows you to specify which things grow or shrink, and if the window is too small to show it then it doesn’t resize them smaller than the preferred size.

http://java.sun.com/products/jfc/tsc/articles/tablelayout/

I’m not sure exactly what your trying to do to offer any better advice.

TR35: Dan Berkenstock, 31 – Technology Review

 TR35: Dan Berkenstock, 31   Technology ReviewDan Berkenstock, 31

Cheaper satellite pictures

Eyes up: Dan Berkenstock is developing new, smaller imaging satellites, along with software that will automatically analyze the images for useful information. Credit: Toby Burditt

Dan Berkenstock, cofounder and chief product officer of Skybox Imaging, wants to let “anyone know what’s happening anywhere in the world at any time.” next year the company plans to launch the first of what it hopes will be a constellation of 12 to 24 satellites taking high-­resolution pictures of Earth. Each satellite should cost about a tenth as much as the $250 million to $500 million imaging satellites operated by companies like DigitalGlobe and GeoEye.

Currently, so few commercial imaging satellites are in orbit that it can take days or even weeks to get pictures of a location—and there will be only one per day. by placing multiple satellites in multiple orbits for the cost of a single traditional satellite, Skybox plans to realize something closer to Berkenstock’s vision of anywhere, anytime coverage: it could photograph nearly any spot on the planet up to three or four times a day, weather permitting. (Skybox’s license from the U.S. government takes security and privacy concerns into account: the satellites will have one-meter resolution—enough detail to identify a crowd but not an individual.)

The secret to the low cost of Skybox’s satellites is their size: each one is about as big as a large trash can, rather than a minivan. with smaller, more modern components than those typical in the conservative aerospace industry, they’re cheaper to build, and less expensive rockets can be used to launch them. Skybox is hoping to recoup the cost of the constellation by expanding the market for fresh satellite imagery beyond the government and the military. Berkenstock is working on tools for storing and classifying pe­tabytes of data–tools that financial analysts, for example, could use to get daily counts of the cars in the parking lots at thousands of retail location. —Stephen Cass

Make carbon reporting mandatory, but keep it simple

1309965307 47 Make carbon reporting mandatory, but keep it simple

Making carbon reporting mandatory offers businesses a great opportunity to save energy and money. To save anything you need to measure the usage first. At CBI, we call this ‘measure to manage’ – you can only change what you can see.

The government has to decide on making carbon reporting mandatory by April 2012, in accordance with the Climate Change Act of 2008. the CBI is in favour of mandatory reporting and has called on the government to implement the act.

Carbon reporting will make it easy for any firm to see the energy they are using and understand how to take action to reduce it.

Of course, many businesses haven’t been waiting for the government’s permission to do this. Nine in 10 FTSE 100 companies currently take part in the Carbon Disclosure Project making their emissions public. But when you count all FTSE companies, the figures drop to 22%. the government needs to make sure they don’t interfere with those already voluntarily reporting and provide a simple and accessible scheme for those who aren’t.

In may 2009 the CBI published a report looking at a common business approach on GHG reporting. the report showed that the best way was to ensure business sees carbon reporting as an opportunity, not another regulatory burden. This is an opportunity for the government to simplify existing regulation and do away with cumbersome approaches, such as the CRC performance league table.

We also need to ensure any reporting done for a company in the UK can slot in to the work they are doing globally. To disaggregate international data would introduce cost and complication that will only succeed in turning companies off. Government must look to make business action as easy as possible by making compliance quick and painless. We’re not ignoring the upfront cost, but we believe there are significant savings to be made in the long-run if the government gets this right.

Rhian Kelly is director of business environment at the CBI

This content is brought to you by Guardian Professional. become a GSB member to get more stories like this direct to your inbox

Observations: How Do We Solve Energy Poverty?

1309549214 93 Observations: How Do We Solve Energy Poverty?

Each year, human civilization consumes some 14 terawatts of power, mostly provided by burning the fossilized sunshine known as coal, oil and natural gas. That’s 2,000 watts for every man, woman and child on the planet. Of course, power isn’t exactly distributed that way. in fact, roughly two billion people lack reliable access to modern energy—whether fossil fuels or electricity—and largely rely on burning charcoal, dung or wood for light, heat and cooking. "Three tablespoons of crude oil provide as much free energy as expended by an adult male laborer in a day’s labor," noted political scientist Thomas Homer-Dixon of the University of Waterloo, during a talk at the Equinox Summit in early June. Bringing modern energy to the poorest and enabling the continued use of copious energy in the developed world without the attendant greenhouse gas emissions are the main reasons many experts think we will need roughly 30 terrawatts of energy by mid-century. And just as cellphones have leapfrogged their way into becoming the communication tool of choice throughout the world, the hope is that solar-battery systems or renewable- or nuclear-based microgrids might displace the need for more coal burning at centralized power plants to give light to the masses. After all, Edison’s first coal plant served a microgrid of sorts in lower Manhattan back in 1882, exclusively for lighting. the killer app of modern energy—whether kerosene or electricity—is lighting, in fact, as that’s the first thing people use it for: either allowing their children to learn to read or extending their working hours for extra income. And then there’s charging for all those leapfrogging cellphones out there. Lighting and battery charging are closely followed by another application—television. for example, the Chinese government is in the midst of a rural improvement scheme that essentially promises three goods: a road, an electricity line and television. But the greenhouse gases that are raising global average temperatures are in the atmosphere as a result of two passions in the developed world: electronic devices and cars. in the U.S., for example, household emissions tripled between 1950 and 2009, according to the U.S. Energy Information Administration, thanks to the use of electricity in the home for devices like TVs. Extending that lifestyle to the rest of the world means more environmental impact. China, for example, has lifted millions of people out of poverty and into the middle class, according to the U.N. Development Program, largely by burning coal—and that’s also made them the nation with the largest total amount of greenhouse gas emissions. And even if more environmentally-friendly technologies are used to extend modern energy’s reach, there will be more environmental impact: more mining and energy use for rare-earth elements for electric motors; more pollution from the process of purifying silicon, incorporating thin films of toxic elements or fossil fuel-based polymers for photovoltaics; more lead, nickel or lithium for batteries. "a cellphone’s embodied energy is one-quarter of a car," said environmental scientist Vaclav Smil of the University of Manitoba at the Equinox Summit, despite being 1/1,000th the size. in fact, back when electric vehicles were resurrected in the 1990s, researchers found that battery-powered cars would introduce more lead into the environment than if they burned leaded gasoline. as it stands, recycling lead-acid batteries—still the standard for starting cars around the world—is one of the world’s worst environmental problems, according to the Blacksmith Institute. Certainly, those of us in the developed world could get by with less—Americans consume twice as much energy as Europeans or Japanese without an appreciable difference in quality of life. "Assuming U.S. and Canada reduce per capita energy consumption to the level of Germany, that would reduce greenhouse gas emissions by 1,200 million metric tons of oil equivalent per year," noted engineer Ding Jianhua of the China Urban Construction, Design and Research Institute in Beijing at the Equinox Summit. "That is nearly the total energy consumption of Latin America and Africa." It is also clear that using less energy is not the answer for the world’s poorest. "in Uganda, less than 5 percent of the population has energy, it doesn’t make sense to talk about energy efficiency," says Juan Jose Daboub, former World Bank managing director and founding CEO of the Global Adaptation Institute, an organization devoted to adapting to the challenges of climate change. in the starkest terms, energy, largely from fossil fuels, has freed humans and animals from labor by powering machines—it would take 100 human slaves to do the work of one gallon of gasoline. It is also about health: burning smoky fuels indoors shortens lives, and a lack of modern energy means a lack of electricity to power refrigerators to store life-saving vaccines. those applications of energy are definitely ones we want to extend to the developing world, certainly more so than sharing our love of gadgets and cars. the trick will be doing it in a way that preserves people and the planet.

Image: © Dominic Sansoni / World Bank

NASA ISS On-Orbit Status 29 June 2011

1309398013 98 NASA ISS On Orbit Status 29 June 2011

all ISS systems continue to function nominally, except those noted previously or below. FE-4 Sergei Volkov tended the Russian/German KPT-21 Plasma Crystal-3+ (Plazmennyi-Kristall/PK-3+) payload, currently running in the MRM2 “Poisk” module, by checking the hermeticity of the evacuated EB vacuum chamber after wakeup and before bedtime (any pressure increase above the vacuum should stay within 5 mmHg). After configuring the STTS comm system for working in MRM2, Sergei then set up and initiated the experiment. Later, the system was disconnected, results downloaded & downlinked and PK-3 deactivated. FE-1 Samokutyayev assisted in Poisk by monitoring the TV downlink from the experiment. [Main objective of PK-3 is to study crystallization dynamics at constant argon pressures (9, 10, 11, 12 & 14 Pa) exposed to alternating current low-frequency and varied voltage electrical field (20 V range), using 1.55 particles. this session is run in semi-automatic mode.] the 26S crewmembers Borisenko, Samokutyayev & Garan joined up in their Soyuz TMA-21 spacecraft (docked at the MRM2 Poisk module) for the standard 3-hr Soyuz Emergency Descent Drill, a regular procedure for each station crew. the exercise, which does not involve any command activation, uses computer simulation (Trenasher Spusk/”descent trainer”) on the RSK1 A31p laptop (swapped with RSK1 T61p for this exercise), with a descent hand controller (RUS) in manual mode to set up reentry conditions and switch between modes. Operators were Aleksandr & Andrey. the two RSK1 laptops were later swapped again. [The onboard training (OBT) session, supported by TsUP instructor tagup, included a review of the pertinent RODF (Russian Operations Data Files), specifically the books on Soyuz Insertion & Descent Procedures, Emergency Descents, and Off-Nominal Situation Procedures such as manual undocking.] At ~10:35am EDT, Borisenko, Volkov, Garan, Furukawa & Fossum had ~30-min blocked out for a review of uplinked ULF7 timeline and walkthrough material. [There was some group discussion, but most of this effort was accomplished individually.] Andrey, Sasha & Ron than spent another 30 min on a fit check of their Kentavr anti-G suits for their return to Earth on Soyuz 26S on 9/8. [The "Centaur" garment (not to be confused with the Russian "Pinguin" suit for spring-loaded body compression, or the "Chibis" lower body negative pressure suit) is a protective anti-G suit ensemble to facilitate the return of a long-duration crewmember into the Earth gravity. Consisting of shorts, gaiters, underpants, jersey and socks, it acts as countermeasure for circulatory disturbance, prevents crewmember from overloading during descent and increases orthostatic tolerance during post-flight adaptation. Russian crewmembers are also advised to ingest fluid-electrolyte additives, viz., three sodium chloride tablets during breakfast and after the midday meal, each time with 300 ml of fluid, and two pills during the meal aboard Soyuz before deorbit.] FE-5 Furukawa performed the periodic changeout of the TOCA WWB (Total Organic Carbon Analyzer / Waste Water Bag) in Node-3, followed by the (approx.) weekly WRS (Water Recovery System) sampling using the TOCA, after first initializing the software and priming (filling) the TOCA water sample hose. this activity was deferred yesterday due to the Conjunction Alert (which cost the crew about 3 hrs on the timeline). [After the approximately 2-hr TOCA analysis, results were transferred to the SSC-5 (Station Support Computer 5) laptop via USB drive for downlink, and the data were also logged.] other activities completed by Satoshi included – * Repeating a data transfer from the T2 treadmill by batch file to the file server for downlinking (was done on 6/24 but left some data untransferred), * The regular 30-day inspection of the AED (Automated External Defibrillator) in the CHeCS (Crew Health Care Systems) rack; [AED is a portable electronic device that automatically diagnoses the potentially life threatening cardiac arrhythmias of ventricular fibrillation and ventricular tachycardia in a patient. It then can treat them through defibrillation, i.e., the application of electrical therapy which stops the arrhythmia, allowing the heart to re-establish an effective rhythm], * The weekly health check of the O2 sensor in CSA-O2 (Compound Specific Analyzer-Oxygen) #1045, which has exceeded its shelf life; [the health check, using both the #1045 and the #1046 unit, was performed in COL (Columbus Orbital Laboratory) since both MCAs (Major Constituency Analyzers) are currently down, i.e., unavailable for calibration, while the COL PPOS (Partial Pressure Oxygen Sensor) could be used for comparison. Afterwards, both CSA-O2s were deactivated and stowed], * Starting his first session (of 3) with the JAXA experiment “Biological Rhythms” (BIORHYTHMS), for which he donned the electrodes of the DWH (Digital Walk Holter) for ECG (Electro-Cardiogram) recording, then initiated the data take for the next 24 hrs; [deferred from yesterday due to Conjunction Alert], and * Powered on the ISSAC (ISS Agricultural Camera) laptop, for ground testing, but kept the US Lab window closed. FE-6 Fossum performed routine service on the WRS (Water Recovery System) using the LFTP (Low Flow Transfer Pump) to transfer one CWC-I (Contingency Water Container-Iodine) to the WPA (Water Processor Assembly) and offloading it entirely. [Estimated offload time: 7 hrs; max. allowed quantity: 85%.] Mike & Satoshi each completed a session with the U.S. HMS VIS (Health Maintenance Systems / Visual Acuity) testing program, using an eye chart for both far & near visual acuity and filling out an eye questionnaire for downloading on a laptop for ground access. Later, both Furukawa & Fossum were subjects for the 2nd onboard session with the 24S-delivered HMS (Health Maintenance System) Tonometry payload, after Paolo Nespoli & Cady Coleman set up and tested the equipment on 4/28. Today, Satoshi & Mike took turns as CMO (Crew Medical Officer) to measure each other’s intraocular pressure, supervised via live S-band video by medical ground personnel. [Data take was preceded by a skill refresher on an eye simulator, observed from the ground. Seven to 10 measurements are required for the Tonometer to calculate an eye pressure reading and the statistical confidence level. for the actual Tonometry, anesthetic eye drops (Proparacaine) are used that are effective in approx. 30 seconds and last for 20 minutes or longer. Tonometer measurements in micro-G will be used to assess the health of the crew's eyes.] Also with focus on ocular research, FE-5 & FE-6 before crew sleep time will be subjects for a PanOptic eye test which requires application of eye drops (Tropicamide [Mydriacyl]) causing eye dilation for subsequent ophthalmic examination, performed by the two crewmembers in turn on each other as operator with an ophthalmoscope. [The procedure, guided by special software on the T61p RoBOT laptop (#1026), captures still & video images of the eye, including the posterior poles, macula & optic disc with the optic nerve, for downlink and expert analysis. Prior to the test, Ron sets up the equipment including video camera, and afterwards downloads the data, then disassembles & stows the gear.] Garan & Fossum again had time set aside to review procedures for their ULF4 EVA on 7/12, and Mike also configured tools & equipment for the spacewalk based on updates of earlier instructions. At ~8:35am, Ron & Mike tagged up with ground specialists and the previous ULF7 EVA crew to discuss EVA timeline & procedures. FE-4 Volkov performed regular service on the Russian LIV/106/01 video complex system in the SM (Service Module) by cleaning its UN941 voltage converter’s vent grille with the vacuum cleaner with soft brush attachment Sergei also completed a data collection session for the psychological program MBI-16 Vzaimodejstvie (“Interactions”), accessing and completing the computerized study questionnaire on the RSE-Med laptop and saving the data in an encrypted file. It was his 2nd onboard session with MBI-16. [The software has a "mood" questionnaire, a "group & work environment" questionnaire, and a "critical incidents" log. Results from the study, which is also mirrored by ground control subjects, could help to improve the ability of future crewmembers to interact safely and effectively with each other and with Mission Control, to have a more positive experience in space during multi-cultural, long-duration missions, and to successfully accomplish mission activities.] Afterwards, with BITS2-12 onboard telemetry measurement system and VD-SU control mode deactivated, FE-4 temporarily removed a BSK-0.5 power-switching device (blok silovoiy kommutatsii) in the SM behind panel 10 and replaced it with a spare unit, checking on disconnecting / reconnecting cables and accessing fasteners plus taking documentary photography. BITS2-12 and VD-SU were then powered up again. FE-1 Samokutyayev set up the pumping equipment with the electric compressor (#41) and started the transfer of water from the BV2 Rodnik water storage tank of Progress 43P (#411), docked at the SM aft port. the SM BV2 tank bladder had been compressed before (for leak check), and the Progress BV2 held ~210 liters. [Each of the spherical Rodnik tanks BV1 & BV2 consists of a hard shell with a soft membrane (bladder) composed of elastic fluoroplastic. the bladder is used to expel water from the tank by compressed air pumped into the tank volume surrounding the membrane and is leak-tested before urine transfers, i.e., with empty tanks, the bladders are expanded against the tank walls and checked for hermeticity.] Later, FE-4 Volkov used the compressor setup for flushing the line of the BV1 tank of Progress 42P (docked at DC1) using 4-5 liters of water from US condensate. Garan conducted the regular (~weekly) inspection & maintenance, as required, of the CGBA-4 (Commercial Generic Bioprocessing Apparatus 4) and CGBA-5 payloads in their ERs (EXPRESS Racks). Mike, Satoshi & Ron spent ~30 min with a joint review of tomorrow’s SSRMS (Space Station Remote Manipulator System) operations, i.e. pre-ULF7 MBS-to-Node 2 walk off. [Since the DOUG (Dynamic Onboard Ubiquitous Graphics) software application is currently not working, the crew used an uplinked "make-do" document showing DOUG views of critical areas such as maneuver clearances.] Andrey Borisenko conducted the routine daily servicing of the SOZh system (Environment Control & Life Support System, ECLSS) in the SM. [Regular daily SOZh maintenance consists, among else, of checking the ASU toilet facilities, replacement of the KTO & KBO solid waste containers, replacement of EDV-SV waste water and EDV-U urine containers and filling EDV-SV, KOV (for Elektron), EDV-ZV & EDV on RP flow regulator.] As a post-reboost activity, the CDR later performed the periodic task of downloading structural dynamics measurements of the IMU-Ts microaccelerometer of the running experiment TEKh-22 “Identifikatsiya” (Identification) in MRM1 (Mini Research Module 1) Rassvet to the RSE1 A31p laptop for subsequent downlink to the ground via OCA. [IMU-Ts is a part of the MRM1 SBI onboard measurement system, installed in PGO behind panel 104.] Sasha Samokutyayev continued the new round of the monthly preventive maintenance of RS (Russian Segment) ventilation systems, today working in the FGB (Funktsionalnyi-Grusovoi Blok) to clean the screen of the TsV1 central circulation ventilator with a vacuum cleaner and soft brush. Borisenko concluded his day by initiating recharge on the SONY HVR-Z7 camcorder battery for the GFI-1 “Relaksatsiya” (Relaxation) Earth Observation experiment. [Using the GFI-1 UFK "Fialka-MV-Kosmos" ultraviolet camera, SP spectrometer and SONY HVR-Z7 HD (High Definition) camcorder, the experiment observes the Earth atmosphere and surface from windows #9 & #6, with spectrometer measurements controlled from Laptop 3. "Relaxation", in Physics, is the transition of an atom or molecule from a higher energy level to a lower one, emitting radiative energy in the process as equilibrium is achieved.] Before “Presleep” period tonight, Ron Garan powers on the MPC (Multi-Protocol Converter) and starts the data flow of video recorded during the day to the ground, with POIC (Payload Operations & Integration Center) routing the onboard HRDL (High-Rate Data Link). After about an hour, MPC will be turned off again. [This is a routine operation which regularly transmits HD onboard video (live or tape playback) to the ground on a daily basis before sleeptime.] At ~8:05am EDT, Andrey, Sasha & Sergei supported a Russian PAO TV event, downlinking a message of greetings to the participants of the 10th Congress of Cultural Sphere Employees in Moscow. [This year the Congress sponsors will play around the main event of 2011, which is the first manned flight. Cultural Professionals employees will prepare creative projects and present their interpretation at the stage.] Jobs listed for Samokutyayev, Borisenko & Volkov today on the Russian discretionary “time permitting” task list were – the daily IMS (Inventory Management System) maintenance, updating/editing its standard “delta file” including stowage locations, for the regular weekly automated export/import to its three databases on the ground (Houston, Moscow, Baikonur) by Sergei, and Preparing & downlinking more reportages (text, photos, videos) for the Roskosmos website to promote Russia’s manned space program (max. file size 500 Mb). Reboost Update: a one-burn reboost of ISS was performed successfully this morning at 8:15am EDT using the Progress 43P DPO rendezvous & docking thrusters, with attitude control handover to RS MCS (Motion Control System) at 6:50am and return to US CMGs at 9:30am. Due to the thruster malfunction during 43P docking, only 4 thrusters were used this morning (instead of the usual 8). Burn duration: 33m 31s (25s longer than expected). To provide the ISS with the remaining part of the intended delta-velocity, a second firing is scheduled in 7/1 (Friday). Numbers will be forthcoming. Purpose of the reboost is to gain altitude and set up phasing conditions for ULF7. CEO (Crew Earth Observation) targets uplinked for today were Mt. Etna, Sicily (Mount Etna has one of the world’s longest documented records of historical volcanism, dating back to 1500 BC. On June 14th an ash cloud from Etna rose about 200 – 250 m above the rim. Also detected was a small plume emanating from Etna in some of the recent ISS CEO imagery. Apparently Etna is going through a small eruptive phase whereby ash plumes have been observed to occur every 5 – 15 minutes. CEO observers are interested in any plume event; trying to capture the source and extent of any plume), Vaduz, Liechtenstein (looking nadir for the capital city of the principality of Liechtenstein. the city is located in a large valley on the banks of the Rhine River. Overlapping mapping frames were suggested to obtain imagery of this capital city), Kingston, Jamaica (as ISS crossed the south coast of Jamaica, the crew was to look for the capital city of Kingston. trying to capture the whole city in a single image. Greater Kingston has a population of 650,000. In the Americas, Kingston is the largest mainly English-speaking city south of the United States), Moorea Coral Reef, Tahiti (weather was predicted to partly cloudy over Tahiti – the location of the Moorea Coral Reef LTER [Long Term Ecological Research] site. Detailed photography of the coral reefs ringing the island was requested to take advantage of the predicted weather conditions. this imagery will be useful in tracking changes to the reef extent and adjacent shoreline morphology), Huachuca Mountains, Mexico, Arizona (the crew was to try for a mapping strip over this small target area as ISS tracked northeastward over northwestern Mexico. this roughly horseshoe-shaped cluster of mountains is situated on the Arizona-Sonora border of the United States and Mexico about 70 miles SSE of Tucson. Observers are seeking detailed mapping views of this target for baseline and change detection of a unique and threatened habitat), and Las Conchas Fire, new Mexico (Dynamic Event: the Las Conchas wildfire has spread to near the Los Alamos National Laboratory. the residents of Los Alamos were ordered to evacuate on Monday. so far the fire has burnt 200 sq km and is being driven by 60 mph winds. the main fire appears to be spreading south and east. looking slightly left of track to document main source points of the fire. Also trying to document the direction of the main plumes). Significant Events ahead (all dates Eastern Time and subject to change): ————–Six-crew operations————- 07/01/11 — ISS Reboost 2 (Progress 43P) 07/08/11 — STS-135/Atlantis launch ULF7 (MPLM) – 11:27am 07/10/11 — STS-135/Atlantis docking ULF7 (MPLM) ~11:09am 07/12/11 — EVA (Garan & Fossum) ~8:50am, 6h30m 07/18/11 — STS-135/Atlantis undock ULF7 (MPLM) – 1:59pm 07/20/11 — STS-135/Atlantis landing KSC ~7:07am 07/27/11 — Russian EVA #29 08/29/11 — Progress M-11M/43P undocking 08/30/11 — Progress M-12M/44P launch 09/01/11 — Progress M-12M/44P docking (SM aft) 09/08/11 – Soyuz TMA-21/26S undock/landing (End of Increment 28) ————–Three-crew operations————- 09/22/11 — Soyuz TMA-03M/28S launch – D.Burbank (CDR-30)/A.Shkaplerov/A.Ivanishin 09/24/11 — Soyuz TMA-03M/28S docking (MRM2) ————–Six-crew operations————- 10/25/11 — Progress M-10M/42P undocking 10/26/11 — Progress M-13M/45P launch 10/28/11 — Progress M-13M/45P docking (DC-1) 11/16/11 — Soyuz TMA-02M/27S undock/landing (End of Increment 29) ————–Three-crew operations————- 11/30/11 — Soyuz TMA-04M/29S launch – O.Kononenko (CDR-31)/A.Kuipers/D.Pettit 12/02/11 — Soyuz TMA-04M/29S docking (MRM1) ————–Six-crew operations—————- 12/26/11 — Progress M-13M/45P undock 12/27/11 — Progress M-14M/46P launch 12/29/11 — Progress M-14M/46P docking (DC-1) 02/29/12 — ATV3 launch readiness 03/05/12 — Progress M-12M/44P undock 03/16/12 — Soyuz TMA-03M/28S undock/landing (End of Increment 30) ————–Three-crew operations————- 03/30/12 — Soyuz TMA-05M/30S launch – G.Padalka (CDR-32)/J.Acaba/K.Volkov 04/01/12 — Soyuz TMA-05M/30S docking (MRM2) ————–Six-crew operations—————- 05/05/12 — 3R Multipurpose Laboratory Module (MLM) w/ERA – launch on Proton (under review) 05/06/12 — Progress M-14M/46P undock 05/07/12 — 3R Multipurpose Laboratory Module (MLM) – docking (under review) 05/16/12 — Soyuz TMA-04M/29S undock/landing (End of Increment 31) ————–Three-crew operations————- 05/29/12 – Soyuz TMA-06M/31S launch – S.Williams (CDR-33)/Y.Malenchenko/A.Hoshide 05/31/12 – Soyuz TMA-06M/31S docking ————–Six-crew operations—————- 09/18/12 — Soyuz TMA-05M/30S undock/landing (End of Increment 32) ————–Three-crew operations————- 10/02/12 — Soyuz TMA-07M/32S launch – K.Ford (CDR-34)/O.Novitskiy/E.Tarelkin 10/04/12 – Soyuz TMA-07M/32S docking ————–Six-crew operations————- 11/16/12 — Soyuz TMA-06M/31S undock/landing (End of Increment 33) ————–Three-crew operations————- 11/30/12 — Soyuz TMA-08M/33S launch – C.Hadfield (CDR-35)/T.Mashburn/R.Romanenko 12/02/12 – Soyuz TMA-08M/33S docking ————–Six-crew operations————- 03/xx/13 — Soyuz TMA-07M/32S undock/landing (End of Increment 34) ————–Three-crew operations————- 03/xx/13 – Soyuz TMA-09M/34S launch – P.Vinogradov (CDR-36)/C.Cassidy/A.Misurkin 03/xx/13 – Soyuz TMA-09M/34S docking ————–Six-crew operations————- 05/xx/13 – Soyuz TMA-08M/33S undock/landing (End of Increment 35) ————–Three-crew operations————- 05/xx/13 – Soyuz TMA-10M/35S launch – M.Suraev (CDR-37)/K.Nyberg/L.Parmitano 05/xx/13 – Soyuz TMA-10M/35S docking ————–Six-crew operations————- 09/xx/13 – Soyuz TMA-09M/34S undock/landing (End of Increment 36) ————–Three-crew operations————- 09/xx/13 – Soyuz TMA-11M/36S launch – M.Hopkins/TBD (CDR-38)/TBD 09/xx/13 – Soyuz TMA-11M/36S docking ————–Six-crew operations————- 11/xx/13 – Soyuz TMA-10M/35S undock/landing (End of Increment 37) ————–Three-crew operations————- 11/xx/13 – Soyuz TMA-12M/37S launch – K.Wakata (CDR-39)/R.Mastracchio/TBD 11/xx/13 – Soyuz TMA-12M/37S docking ————–Six-crew operations————- 03/xx/14 – Soyuz TMA-11M/36S undock/landing (End of Increment 38) ————–Three-crew operations————-